Throttle Dual Actuator

Technical Information

Catalogue No: C0824
Category: Engine Control
Object Type: Actuator
Object Name: Throttle Dual Actuator
Part No: 3D6109-A-3
Serial No: 028/64
Manufacturer: Elliott Bros
Division: Unknown
Platform(s): VC10 
Year of Manufacture: 1964
Width (mm):
Height (mm):
Depth (mm):
Weight (g):
Location: Archive Object Store

Throttle Dual Actuator
Type No. 3D6109-A-3
Ref. No.
Ser. No. 028/64


The automatic flight control system of the Standard and Super VC10 was designed to be capable of development to full blind landing. To meet this requirement the system had to be capable of failure survival and this includes associated services such as power supplies and flying controls. The method of autopilot failure survival chosen was to provide two monitored systems which are fail soft, i.e. there is negligible aircraft disturbance after a failure. Only one autopilot is used to fly the aircraft, and the two systems, including power supplies, are completely independent. Each
autopilot has a comparison monitor which detects faults and, in flight, will disconnect the system if these faults are likely to lead to dangerous conditions. For autoflare the system provides for
automatic changeover to the second monitored autopilot system, in the event of fault in the first. Under these conditions the second autopilot is primed and ready to take over. If for any reason the
monitoring system fails to prevent an autopilot runaway, the control movement is limited to a safe amount by the yielding of a torque-limiting spring.
Many of the needed components were already present in the autopilot fit on the Standard VC10s, to achieve the autoland capacity the system on the Super received some additional items. The system, supplied by Elliott Brothers (London) Ltd, is based largely on components of the well-proved Bendix PB-20 autopilot, made under licence by Elliott, and interchangeable with American built components as installed in Boeing 707s. However, the system as a whole i.e., the dual autopilot concept was novel, and designed entirely by Elliott.
The Throttle Dual Actuator is controlled by the Autothrottle Dual Controller and was the actuator controlling operation of the dual throttle system. There was only one such unit in the VC10 system. This item was Returned from RAF Brize Norton in May 1996 as being very noisy in operation under load.

Click to enlarge Click to enlarge