Buccaneer HUD Tube Unit Assembly

Technical Information

Catalogue No: C0033
Category: Head-Up Display [HUD]
Object Type: Module/Sub-Assembly/Component
Object Name: Buccaneer HUD Tube Unit Assembly
Part No: D93/26199
Serial No: 018, ???
Manufacturer: Rank Cintel
Division: Unknown
Platform(s): Buccaneer 
Year of Manufacture: circa 1960
Dimensions:
Width (mm):
75 
Height (mm):
115 
Depth (mm):
170 
Weight (g):
Location: Archive Object Store
Inscription(s):

None

Notes:

CRT CV6050, G0602-J2
Ser No 018 is new but has no CRT

The Buccaneer Strike Sight (Head Up Display) was supplied in two pressurized containers; the Head Up Display Unit and the Waveform Generator. The Rank Cintel precision Cathode Ray Tube had a two inch screen and had a broadband green P1 phosphor (described as zinc orthosilicate or willemite). Electro-magnetic deflection and permanent magnet focusing were used. The tube operated with a 20kV EHT, a beam current of 20-100microamps and gave sufficient luminance for the symbology to be visible against background illumination of 10,000ft Lamberts, thereby achieving a contrast ratio of 1.2:1. The spot size was 0.007 inch and resolution was approximately 280 lines. The CRT was warranted for about 50 hours. The Mark I display had a valve EHT Unit which took ages to power up. Later versions had a solid state EHT. The CRT is also identified as CV6050, G0602-J2. The CRT housing is an interesting assembly with a moulded plastic insulator for the tube body and EHT stem with an outer of machined Bakelite.

This unit is a complete Tube Unit Assembly. The above dimensions are with the CRT in the housing. The CRT is 55mm diam x 210mm long.

Click to enlarge