F-16 LANTIRN Diffractive HUD (display model)

Technical Information

Catalogue No: C0252
Category: Head-Up Display [HUD]
Object Type: Model
Object Name: F-16 LANTIRN Diffractive HUD (display model)
Part No: None
Serial No: None
Manufacturer: John Glossop Model Maker
Division: Unknown
Platform(s): F-16C/D Fighting Falcon 
Year of Manufacture:
Width (mm):
Height (mm):
Depth (mm):
Weight (g):
Location: Archive Object Store



The Company developed a diffractive optical system using three combiner elements which gave a large Head Motion Box. In 1980 Marconi won the contract to supply the HUD for the USAF LANTIRN programme of which 932 were manufactured for the USAF. The LANTIRN programme links a Forward Looking Infra Red system to the HUD to present a TV picture at night of the outside world. The slight loss of transmission through the three combiner elements was not a problem in night operation although not ideal for Air-to-Air.

A raster display alone cannot give adequate symbol resolution and ensure that the symbology is always visible over the brightest shade of raster. A technique of drawing all the symbology cursively in the field blank period of the video was developed which meant drawing nearly ten times as fast. Suddenly flying by night at low level was possible. The HUD gives a 30° field of view in azimuth; essential for looking into turns and a 20° vertical view. The HUD was known as the DHUD for Diffractive HUD or WARHUD for Wide Angle Raster HUD.

This model of the LANTIRN Optical Module with the Up Front Control Panel was made by John Glossop a professional model maker.

The rear of the support frame is written:
"To remove HUD from support frame, undo 4 No. M6 x 35mm panhead bolts on framework end and slide HUD out sideways. To replace reverse procedure."

Click to enlarge