Weapon Programming Unit (space model)

Technical Information

Catalogue No: C0277
Category: Stores/Weapon Management
Object Type: Model
Object Name: Weapon Programming Unit (space model)
Part No: None
Serial No: None
Manufacturer: Unknown
Division: Instrument Systems [ISD]
Platform(s): Tornado 
Year of Manufacture: Unknown
Dimensions:
Width (mm):
195 
Height (mm):
290 
Depth (mm):
410 
Weight (g):
4,930 
Location: Archive Object Store
Inscription(s):

None

Notes:

The stores-management system (SMS) controls the selection, arming, and release of the Tornado’s bombs, rockets, guns and guided weapons and times the release in accordance with target data, wind, type of weapon, and other inputs.. Emergency and selective jettison facilities are also provided.

The system consists of four distinct unit types, which are interconnected by means of digital data transmission. As well as the two control panels, there is a master computer and stores loaded unit and numerous decoder units. These latter are responsible for digital data transmission interfaces, and for providing the power signals for stores release. In addition there are wing mounted Pilot Indicator Ordnance Release units.

The need for safety and mission success has been the prime consideration in formulating system philosophy, design and implementation.

The system is basically a duplicate, “both on line” arrangement and is highly self-monitored. A release is only permitted if both lanes agree, or if, on disagreement, the faulty lane is detected by its monitoring.

The master computer and stores loaded unit accommodates the following facilities:
● Weapon loaded facilities;
● Two optically-isolated 16 bit digital processor and stores;
● Interface electronics;
● Duplicate power supplies;
● System sub-fusing.

This has represented a major design constraint and, to satisfy it, extensive use of special hybrid components was necessary with multi-layer printed circuit cards loaded on both sides with components. CMOS technology is used to minimise the resulting heat dissipation problem, and sophisticated cold wall techniques combined with channelled air cooling are used. The contract was work shared with Selenia in Rome with the majority of the design carried out by Marconi-Elliott Avionic Systems Limited with Selenia responsible for manufacturing most of the later development phase hardware.

The box also has a Dymo label marked "ISD 103".

Click to enlarge
Related Items: