« Previous Next »

Servovalve

Technical Information

Catalogue No: C0841
Category: Flight Control
Object Type: Module/Sub-Assembly/Component
Object Name: Servovalve
Part No: 3C 6773
Serial No: 275
Manufacturer: Elliott Bros (London) Ltd
Division: Servo Components Division
Platform(s): Lightning
Year of Manufacture: circa 1960
Dimensions: Width (mm): 48
Height (mm): 86
Depth (mm): 66
Weight (g): 690
Location: Rack RAA02 [Main Store]
Inscription(s):

Elliott
Servovalve
3C 6773
Ser. 275

Notes:

The valve body is stamped:
"3C6638 Iss.6
BCH.S 261"

The solenoid section bears the label:
"Keep away from Iron and Steel"

The unit has a patent declaration label:
"Patented:
U.K. 844,742:
Switzerland 337,046:
France 1,159,240.S.G.D.G:
U.S.A 2,919,716:
Italy 558,137:
Others Pending:"

An electro-hydraulic servo valve is an electrically operated valve that controls how hydraulic fluid is sent to an actuator. Servo valves are often used to control powerful hydraulic cylinders with a very small electrical signal. This low-powered signal goes through an amplifier, which boosts the signal until it becomes strong enough to change the position of the servo valve. The position transducer measures the position of the spool (actual value, position voltage). This signal is then demodulated and fed back to the controller where it is compared with the command signal. The controller drives the pilot stage until the error between command signal and feedback signal will be zero. Thus the position of the spool is proportional to the electric command signal. In fly-by-wire aircraft the control surfaces are often moved by servo valves connected to hydraulic cylinders. The signals to the servo valves are controlled by a flight control computer that receives commands from the pilot and monitors the flight of the aircraft.

Linear Actuators: On aircraft linear actuators may be used for flight control surfaces, wing flaps, and spoilers. Hydraulics deliver a great deal of power without taking up too much space or weight, meant that they massively help pilots in undertaking necessary mechanical tasks without using too much energy.

The other advantages of hydraulics are the quick response to the demands that may be placed upon the system. They are also reliable and reasonably easy to maintain. Because they do not use electricity, there is no chance of a shock hazard, and the chances of being a fire hazard are low, which makes them a safer option than other equivalent systems.

Perhaps the main advantage of a hydraulic system is that they can handle a practically unlimited amount of work due to the immense force they can produce. This is all the more important in modern day aircraft.

Hydraulic fluid is pumped from a reservoir, either by an electric, or engine driven pump. It is filtered to keep it clean, and then passes through a selector valve, which relieves extra pressure.

Once it reaches the linear actuator, the fluid power is turned into work by a piston. This power is then used to move an aircraft system or flight control. These actuators can be either single or double acting, depending on the requirements of the system, meaning that the fluid can be applied to one or both sides of the actuator. The selector valve allows for the fluid direction to be controlled, which is necessary for operations such requiring extension and retraction.

The actuating cylinder also contains a reduction gear, which allows it to control the rotating motion to what is needed within the system. Previously, systems would use steel cables connected by pulleys to control motion. The cables that connected the controlling mechanism, such as the pedals, to the controlled surface, such as the rudder, would be subject to expansion due to temperature changes. Hydraulic systems though, are capable of controlling motion without worrying about such concerns, as they do not operate in an environment that is not open to the atmosphere. This means that hydraulic systems not only provide better control for the pilots using them, but also increase response times, making them an imperative part of aerospace engineering.

http://www.acorn-ind.co.uk/insight/The-role-of-hydraulic-actuators-within-aircraft-systems/

Rotary Actuators:

Electric rotary actuators:

Stepper motors are a form of electric motor that has the ability to move in discrete steps of a fixed size. This can be used either to produce continuous rotation at a controlled speed or to move by a controlled angular amount. If the stepper is combined with either a position encoder or at least a single datum sensor at the zero position, it is possible to move the motor to any angular position and so to act as a rotary actuator.

Servomotors

A servomotor is a packaged combination of several components: a motor (usually electric, although fluid power motors may also be used), a gear train to reduce the many rotations of the motor to a higher torque rotation, a position encoder that identifies the position of the output shaft and an inbuilt control system. The input control signal to the servo indicates the desired output position. Any difference between the position commanded and the position of the encoder gives rise to an error signal that causes the motor and geartrain to rotate until the encoder reflects a position matching that commanded.

Fluid power rotary actuators:

Hydraulic power may be used to drive an actuator, usually the larger and more powerful types. Fluid power actuators are of two common forms: those where a linear piston and cylinder mechanism is geared to produce rotation (rack and pinion), and those where a rotating asymmetrical vane swings through a cylinder of two different radii. The differential pressure between the two sides of the vane gives rise to an unbalanced force and thus a torque on the output shaft. Vane actuators require a number of sliding seals and the joints between these seals have tended to cause more problems with leakage than for the piston and cylinder type. The three most commonly used types are, vane and helical.

Simple planetary actuators are most commonly used for commercial leading edge slat applications while compound differential planetary actuators offer higher ratios for torque multiplication and are most commonly used for trailing edge flap designs.

 

Click to enlarge Click to enlarge Click to enlarge
Related Items: