« Previous Next »

Pedal Shaker Assembly

Technical Information

Catalogue No: C0625
Category: Flight Control
Object Type: Actuator
Object Name: Pedal Shaker Assembly
Part No: 15-022-01
Serial No: 004
Manufacturer: GEC Avionics
Division: Unknown
Platform(s): EAP 
Year of Manufacture: circa 1985
Width (mm):
Height (mm):
Depth (mm):
Weight (g):
Location: Main Object Store

GEC Avionics Limited
Pedal Shaker Assembly
Part 15-022-01
Ser 004
Code K0656
Modification Record 1


The shaker's 2m screened cable is included in its weight but excluded from its size.

The year of manufacture is based on the date of EAP's first flight.

This Unit is part of the Flight Control system and is put into operation when the onset of a stall is detected. The system uses the Angle of Attack Transmitter mounted on the nose and other inputs such as gear and flap position and when it senses an impending stall it will activate the Shaker. The Shaker is an electric motor with an eccentric or cam built in that causes it to vibrate rather coarsely. On the EAP the Shaker is attached to one Rudder Pedal to provide the pilot with a physical warning that the aircraft is approaching a stall.
Marconi Avionics, in common with other suppliers, made equipment for the EAP at their own cost in anticipation of orders for the Typhoon. Around 6 to 8 sets of equipment were made and all were put through the full evaluation/qualification tests.

Click to enlarge Click to enlarge