Rochester Avionic Archives

Air Data Computer (SCADC2)

 Air Data Computer (SCADC2) - Photo 1
 Air Data Computer (SCADC2) - Photo 2
Catalogue NumberC0159
Sub-categories
Year of manufactureCirca 1985
LocationRack RAA10 [Main Store]
Object TypeSignal/Data Processor
DivisionInstrument Systems [ISD]
Platform
Manufacturer
Part No50-085-01
Serial NoSP.M.01
Dimensions
Width (mm):218
Height (mm):158
Depth (mm):509
Weight (g):10100
Inscription(s)G.E.C. Avionics Ltd Cmptr. Air Data. CPU-175/A PN 50-085-01 Mfr K0656 DsgnAct K0656 NSN Contr SerNo SP.M.01
NotesThis unit is a derivative of the SCADC family but is the Central Air Data Computer CPU175/A designed for the F-14 Tomcat. This is Serial No. SP.M.01.

Air data systems provide accurate information on quantities such as pressure altitude, vertical speed, calibrated airspeed, true airspeed, Mach number, static air temperature and air density ratio. This information is essential for the pilot to fly the aircraft safely and is also required by a number of key avionic subsystems which enable the pilot to carry out the mission. It is thus one of the key avionic systems in its own right and forms part of the essential core of avionic sub systems required in all modern aircraft, civil or military.

The air data quantities; pressure, altitude, vertical speed, calibrated airspeed, true airspeed, Mach number etc. are derived from three basic measurements by sensors connected to probes which measure:

Total (or Pitot) pressure
Static pressure
Total (or indicated) air temperature

The total pressure, PT, is measured by means of an absolute pressure sensor (or transducer) connected to a Pitot tube facing the moving airstream. The Pitot pressure is a measure of ram air pressure (the air pressure created by vehicle motion or the air ramming into the tube). When airspeed increases, the ram air pressure is increased, which can be translated by the airspeed indicator.

The static pressure of the free airstream, PS, is measured by an absolute pressure transducer connected to a suitable orifice located where the surface pressure is nearly the same as the pressure of the surrounding atmosphere. The static pressure is obtained through a static port which most often is a flush-mounted hole on the fuselage of an aircraft located where it can access the air flow in a relatively undisturbed area. Some aircraft may have a single static port, while others may have more than one. When the aircraft climbs, static pressure will decrease.

High performance military aircraft generally have a combined Pitot/static probe which extends out in front of the aircraft so as to be as far away as practicable from aerodynamic interference effects and shock waves generated by the aircraft structure. A Pitot-static tube effectively integrates the static ports into the Pitot probe. It incorporates a second coaxial tube (or tubes) with pressure sampling holes on the sides of the probe, outside the direct airflow, to measure the static pressure. Some civil transport aircraft have Pitot probes with separate static pressure orifices located in the fuselage generally somewhere between the nose and the wing.

From the measurements of static pressure PT and total pressure PS it is possible to derive the Pressure Altitude, Vertical Speed, Calibrated Airspeed and Mach number. Measurement of the air temperature is made by means of a temperature sensor installed in a probe in the airstream and from this a function called Total Air Temperature can be calculated.

In 1981 Instrument Systems Division began the design of a new generation of Air Data Computers designed for the combined USAF and USN Standard Central Air Data Computer (SCADC) programme. The system was designed to fulfil the retrofit requirements of 38 different aircraft types and to do so with only four configurations. The aircraft types include the following:-

 

A-4M and TA-4J Skyhawk, A-6E/F, KA-6D and EA-6A Intruder, EA-6B Prowler, TC-4C Gulfstream, A-7D/E/K and TA-7C Corsair II, C-2A Greyhound, E-2C Hawkeye, KC-135 Stratotanker, C-5A/B Galaxy, C-141A/B Starlifter, F-111A/E/D/F, FB-111A, EF-111A, F-4C/D/E/G/J/N/S, and RF-4B/C Phantom and the S-3A/B and US-3A Viking. In 1992 an order for a further 290 units was received, being the eighth option, bringing the total procured to 5552 units. 387 units of the SCADC system were at this time being supplied for the F-14 Tomcat.

 

The high commonality was achieved with a unique software re-configurable design. Output parameters, ranges and scalings are selected for each aircraft type by the software, which recognises the host from a code wired into the aircraft connector pins. The SCADC core hardware set provides over 80% of the hardware in every application and the remainder is addressed by one or two special-to-type modules. A multiplicity of analogue interfaces can be handled and the Mil-Std 1553 DataBus is also a feature. Production commenced in 1985 with first deliveries the following year and in 1989 these deliveries surpassed 4,000 units. In addition in 1988 ISD received the Queen’s Award for Technological Achievement for SCADC.

 

Subscribe to our Newsletter

Are you interested in receiving our newsletter?

Subscribe
About Rochester Avionic Archives

Our collection exceeds 1900 pieces of equipment from HUDs to Air Data Computers, and we also have a substantial archive of Brochures, Company Newspapers, Films, Videos and Photographs.

Rochester Avionic Archives
Website design & build byHeliocentrix
Copyright © 2025 Rochester Avionic Archives

BAE Systems will collect and process information about you that may be subject to data protection laws. For more information about how we use and disclose your personal information, how we protect your information, our legal basis to use your information, your rights and who you can contact, please refer to the relevant sections of our Privacy Notice at www.baesystems.com/en/privacy