« Previous Next »

Pitot-Static Probe

Technical Information

Catalogue No: C0996
Category: Air Data
Object Type: Sensor/Transducer
Object Name: Pitot-Static Probe
Part No: 850BM
Serial No: 6578E
Manufacturer: Rosemount
Division: Unknown
Platform(s): Phoenix UAV 
Year of Manufacture: circa 1988
Dimensions:
Width (mm):
120 
Height (mm):
120 
Depth (mm):
450 
Weight (g):
580 
Location: Main Object Store
Inscription(s):

Model No 850BM
Pitot Static Tube
Ser No 6578E
Mod 0
Rosemount Ltd
Made in England
------------------------
7220726 Iss Aa
MM217294

Notes:

The static pressure is sensed via eight, ~1mm diameter holes, roughly midway along the probe shaft. It is fitted with two 1.9m flexible tubes for pitot and static.

It is hand marked: "For Training Purposes Only".

Air data systems provide accurate information on quantities such as pressure altitude, vertical speed, calibrated airspeed, true airspeed, Mach number, static air temperature and air density ratio. This information is essential for the pilot to fly the aircraft safely and is also required by a number of key avionic subsystems which enable the pilot to carry out the mission. It is thus one of the key avionic systems in its own right and forms part of the essential core of avionic sub systems required in all modern aircraft, civil or military.

The air data quantities; pressure, altitude, vertical speed, calibrated airspeed, true airspeed, Mach number etc. are derived from three basic measurements by sensors connected to probes which measure:

Total (or Pitot) pressure
Static pressure
Total (or indicated) air temperature

The total pressure, PT, is measured by means of an absolute pressure sensor (or transducer) connected to a Pitot tube facing the moving airstream. The Pitot pressure is a measure of ram air pressure (the air pressure created by vehicle motion or the air ramming into the tube). When airspeed increases, the ram air pressure is increased, which can be translated by the airspeed indicator.

The static pressure of the free airstream, PS, is measured by an absolute pressure transducer connected to a suitable orifice located where the surface pressure is nearly the same as the pressure of the surrounding atmosphere. The static pressure is obtained through a static port which most often is a flush-mounted hole on the fuselage of an aircraft located where it can access the air flow in a relatively undisturbed area. Some aircraft may have a single static port, while others may have more than one. When the aircraft climbs, static pressure will decrease.

High performance military aircraft generally have a combined Pitot/static probe which extends out in front of the aircraft so as to be as far away as practicable from aerodynamic interference effects and shock waves generated by the aircraft structure. A Pitot-static tube effectively integrates the static ports into the Pitot probe. It incorporates a second coaxial tube (or tubes) with pressure sampling holes on the sides of the probe, outside the direct airflow, to measure the static pressure. Some civil transport aircraft have Pitot probes with separate static pressure orifices located in the fuselage generally somewhere between the nose and the wing.

From the measurements of static pressure PT and total pressure PS it is possible to derive the Pressure Altitude, Vertical Speed, Calibrated Airspeed and Mach number. Measurement of the air temperature is made by means of a temperature sensor installed in a probe in the airstream and from this a function called Total Air Temperature can be calculated.

Click to enlarge Click to enlarge